Ray Receiver

Power Facility

Receiving high-energy rays transmitted from the Dyson Swarm or Dyson Sphere, the received energy can be directly output to the grid or stored as photons in a critical state.

Energy Type		Ion Current
Power		6.0 MW
Made In		Assembler
Hand-Make		Replicator
Stack Size		20

1

8 s

20

10

5

20

Summary

The Ray Receiver is a building used to collect power generated by a Dyson Sphere/Swarm. The longer they are continuously in view of the swarm, the more efficient they become.

Initially, the Ray Receiver produces 6 MW and has a ray receiving efficiency of 30%. While continuously receiving energy, the energy production increases to 15 MW and 42% ray receiving efficiency at 100% "Continuous receiving".

Note: The technology Planetary Ionosphere Utilization reduces the line-of-sight barrier to maintaining a continuous connection, presumably by bouncing the energy beams off of the planet's Ionosphere to reach the receiver wherever it may be. This is, in effect, the same way that Radio waves can travel over the horizon, on real-world Earth. For this to work, the planet must have an atmosphere, and the Ray Receiver must be supplied with a Graviton Lens. This does not completely remove the line-of-sight requirement, as there is still a dead spot on some planets. The size of the dead spot appears to depend on the distance of the planet to the star.

Inserting a Graviton Lens doubles the power conversion of the Ray Receiver. With a Graviton Lens it produces 30 MW and requests more power from the Dyson Sphere accordingly. The Graviton Lens will be consumed at a rate of 0.25 Graviton Lenses per minute.

After researching Dirac Inversion Mechanism the Ray Receiver can be put in an alternative "Photon" mode where it produces Critical ePhotons. The Ray Receiver produces 6 Critical Photons per minute while consuming 120 MW. When supplied with a Graviton Lens the Ray Receiver produces 12 Critical Photons per minute and consumes 240 MW.

The ray receiving efficiency can be increased with the Ray Transmission Efficiency Upgrade. The upgrades stack multiplicatively. The current max receiving efficiency can be calculated as follows:

max receiving efficiency[%] = 100% - 70% * 0.9^small_upgrade_count * 0.85^big_upgrade_count

The upgrades give 10% more efficiency for the first 6 upgrades (small upgrades) and 15% more efficiency for the last two upgrades (big upgrades).

Continuous receiving increases actual ray receiving efficiency even further. Although for the values between 0% and 100% the math is very complicated, for 100% Continuous receiving it simplifies to:

actual receiving efficiency[%] = 100% - 0.6 * solar ray basic energy dissipation[%], where

solar ray basic energy dissipation[%] = 100% - max receiving efficiency[%]

This is also directly visible in the "Current upgrade data" in game.

Example for the Ray transmission efficiency level 10:

max receiving efficiency: 100% - 70% * 0.9^6 * 0.85^4 = 80.58%
solar ray basic energy dissipation: 100% - max receiving efficiency = 19.42%
actual ray receiving efficiency for the ray receiver with 100% continuous receiving: 100% - 0.6 * 19.42% = 88.35%

The actual power draw on the Dyson Sphere can be calculated as such:

dyson_sphere_draw = (energy_output * 100) / ray_receiving_efficiency

For example, with a ray receiving efficiency of 75%, the power draw on the Dyson Sphere would be 20 MW at 100% "continuous receiving".

Production Chain

Recipe	Building	Replicator?	Technology
1 8 s 40 20 10 5 20		✔

Raw Materials

Iron Ore = 560
Copper Ore = 110
Silicon Ore = 40
Stone = 120
Coal = 40

Player Tips & Tricks

On planets with a low axial inclination, place Ray Receivers at their poles for maximum exposure & efficiency. The poles of these planets are always within line of sight to your Dyson Sphere/Swarm.
For planets with higher axial inclination, there is no such sweet spot. With the Planetary Ionosphere Utilization Technology, however, the line of sight restriction is removed, and they can be placed anywhere, so long as the planet has an atmosphere and you can keep them stocked with Graviton Lenses.
Building Ray Receivers inside a Dyson Sphere, even just a single line row of frames at 0° Orbit Inclination, will cause the efficiency bonus to never degrade. Also works for a Dyson Swarm if you can maintain it.
This facility will 'daisy-chain' for Graviton Lens insertion, but not for Critical Photon production, so you can feed lenses into one facility then chain the rest together directly, but it will not pass photons through a chain.