Thermal Power Plant

Thermal Power Plant

edit

Power Facility

Facility that use combustible materials (such as coal) as fuel to generate electrical energy. Between the energy output and the calorific value of the consumed fuels has energy efficiency.

Energy Type		Thermal
Power		2.16 MW
Energy Efficiency		80%
Made In		Assembler
Hand-Make		Replicator
Stack Size		50

---

1

5 s

10

4

4

4

Summary

Thermal Generators are a descendant of the old 20th century powerplants. Burning fossil fuels heats and boils water into steam, which spins generator turbines. Modern Advancements have allowed the water to be recycled, and more energy to be captured from the combustion process. Even with modern improvements, these generators still suffer from an 20% efficiency loss, reducing the amount of energy captured from fuel. Even with the efficiency loss, thermal generators are very compact, allowing only a few of them to power large factories. In the same space that 2 wind turbines take up, Thermal Generators produce over three times the power. They also run full time, unlike solar panels which are restricted to daytime operations.

Production Chain

Recipe	Building	Replicator?	Technology
1 5 s 10 4 4 4		✔

Components

Component	Time	Sub componet 1	Sub componet 2
1x	1 sec	1x
1x	1 sec	1x
1x	1.5 sec	1x
2x	2 sec	2x	1x

Total Raw Materials

Materials

Item	Used for
16x
4x
2x

Player Tips & Tricks

Burn Rates

The duration a piece of fuel will last is based on its MJ value. Thermal generators suffer a 20% loss due to inefficiency. to calculate how long a Fuel unit will last, multiply the MJ rating by 80% (or 0.8), then divide it by the 2.16MW that the generator produces per second. The resulting number will be how long one unit of that fuel will last.
Example 1: Coal has a energy density of 2.7MJ. take away the efficiency loss (2.7 * 0.8) and you are left with 2.16MJ. Divide that by the thermal generators max production (2.16MJ / 2.16MW) and you get that one piece of coal will burn for one second at full use.
Example 2: Hydrogen Fuel Rods has a energy density of 40MJ. take away the efficiency loss (40MJ * 0.8) and you are left with 32MJ. Divide that by the thermal generators max production (32MJ / 2.16MW) and you get that one Fuel Rod will burn for 14.8 seconds at full use. Or 20.25/min (for Hydrogen destruction)

Fuel burn times at 100% load

Fuel	Energy	80% in TPS	Burntime
Plants	500 KJ	400 KJ	0.185 s / 27 every   5 s
Wood	1.5 MJ	1.2 MJ	0.555 s /   9 every   5 s
Coal	2.7 MJ	2.16 MJ	1.000 s /   1 every   1 s
Energetic Graphite	6.3 MJ	5.04 MJ	2.333 s /   3 every   7 s
Crude Oil	4 MJ	3.2 MJ	1.481 s / 27 every 40 s
Refined Oil	4.4 MJ	3.52 MJ	1.629 s / 27 every 44 s
Hydrogen & Deuterium	8 MJ	6.4 MJ	2.962 s / 27 every 80 s
Fire Ice	4.8 MJ	3.84 MJ	1.777 s /   9 every 16 s

Fuel Production Costs

Since fuel production has its own energy cost, dedicated power production should take into account whether denser crafted fuels are a net gain over the components to make them.
Example 1: Coal has an energy density of 2.7MJ. Coal can be smelted into Energetic Graphite at a 2:1 ratio, which has an energy density of 6.3MJ, 16% more joules. However, smelting Energetic Graphite requires 720 kJ, and the sorters to access the smelter adds ~36 kJ. This leaves a mere 5.6kJ over coal when processed, while increasing the overhead usage. Which requires more thermal generators for the same available wattage.