Accumulator: Difference between revisions

Latest revision as of 00:09, 12 July 2024

Accumulator

Power Storage

Power storage facility. When the electricity of the power grid is surplus, it will automatically store the excess power. When the power supply is insufficient, it will automatically discharge to maintain the operation of the facilities.

Input Power		1.5 MW
Output Power		2.25 MW
Accumulated		540.0 MJ
Made In		Assembler
Hand-make		Replicator
Grid Size		3×3
Stack Size		50

1

3 s

6

1

3

Summary

Accumulators are structures that store excess power for use later. They are often seen paired with Solar Panel setups, since Solar Panels are only active during the day. This allows the factory to operate at night, running off of the stored power in the Accumulators. Additionally, they can be used to cover small spikes in power demand, such as recharging Icarus.

Picking up a partially charged Accumulator will cause it to lose all its charge. However, once an Accumulator is completely full, it becomes a Full Accumulator. A Full Accumulator will keep its charge when put in storage. Energy Exchangers can charge and discharge Accumulators accordingly, and interstellar power becomes possible by sending Full Accumulators between planets with an Interstellar Logistics Station.

Full Accumulators can be used as fuel for Icarus and discharge at a rate of 18.8 MW. This will return the empty Accumulator when fully discharged.

Production Chain

Recipe	Building	Replicator?	Technology
1 3 s 6 1 3		✔


	1 Sec
1	<------	1


	3 Sec
1	<------	2	3	1


	1 Sec	OR
1	<------	1

Player Tips & Tricks

Placing Acculumators on a planet, even just a single one, will allow the player to use the Statistics Panel to determine if the power grid's load ever exceeds the amount of power generated. In the Power tab, keep an eye on the Real-Time Battery Data graph. If the power grid's satisfaction is 100%, the Accumulator will fully charge and never discharge. However, the moment satisfaction drops below 100%, the Accumulator will begin discharging. This discharge will show up in the battery data graph as a blue spike, showing the player exactly when the grid was not fully satisfied. Keep in mind that this trick will not work if the planet is powered by Energy Exchangers, as these will be constantly discharging and thus the single Accumulator's power spike will likely not be significant enough to be visible.

@@ Line 5: / Line 5: @@
 '''Accumulators''' are structures that store excess [[Power_Grid|power]] for use later. They are often seen paired with [[Solar Panel]] setups, since Solar Panels are only active during the day. This allows the factory to operate at night, running off of the stored power in the Accumulators. Additionally, they can be used to cover small spikes in power demand, such as recharging [[Icarus]].
-Picking up a partially charged Accumulator will cause it to lose all its charge. However, once an Accumulator is completely full, it becomes a Full Accumulator. A Full Accumulator will keep its charge when put in storage. [[Energy_Exchanger|Energy Exchangers]] can charge and discharge Accumulators accordingly, and interstellar power becomes possible by sending Full Accumulators between planets with an [[Interstellar_Logistics_Station|Interstellar Logistics Station]].
+Picking up a partially charged Accumulator will cause it to lose all its charge. However, once an Accumulator is completely full, it becomes a Full Accumulator. A Full Accumulator will keep its charge when put in storage. [[Energy_Exchanger|Energy Exchangers]] can charge and discharge Accumulators accordingly, and interstellar power becomes possible by sending [[Full Accumulator]]s between planets with an [[Interstellar_Logistics_Station|Interstellar Logistics Station]].
-Full Accumulators can be used as fuel for Icarus and discharge at a rate of 18.8 MW. However, this will ''not'' return the empty Accumulator.
+Full Accumulators can be used as fuel for Icarus and discharge at a rate of 18.8 MW. This will return the empty Accumulator when fully discharged.
 ==Production Chain==
-{{ProductionChainTable/head}}
+{{#invoke:GameData|recipesMakingDirect|{{PAGENAME}}}}
-{{ProductionChain
-|Building=Assembler
-|Replicator=Yes
-|Technology=Energy Storage
-|Recipe=
-  {{ItemRecipe
-    |Out1=Accumulator
-    |Out1Qty=1
-    |CraftTime=5 s
-    |In1=Iron Ingot
-    |In1Qty=6
-    |In2=Super-Magnetic Ring
-    |In2Qty=1
-    |In3=Crystal Silicon
-    |In3Qty=6
-    }}
-  }}
-|}
 {| class="wikitable"
@@ Line 55: / Line 37: @@
 ==Player Tips & Tricks==
-*Placing a single accumulator building on a planet will let you use the Statistics Panel's Power tab to see if the planet's power grid ever dropped below 100% satisfaction -- alerting you to the issue.  If satisfaction remains 100% then the accumulator will fully charge and never show any discharge.  If power production falls below power demand the accumulator will discharge which will show up an blue spike on the Real-time battery data chart - and you can adjust the charge timespan to see if there was ever a problem.  (Note: this trick only works if you're not shipping full accumulators in to power the planet's grid)
+*Placing Acculumators on a planet, even just a single one, will allow the player to use the Statistics Panel to determine if the power grid's load ever exceeds the amount of power generated. In the Power tab, keep an eye on the '''Real-Time Battery Data''' graph. If the power grid's satisfaction is 100%, the Accumulator will fully charge and never discharge. However, the moment satisfaction drops below 100%, the Accumulator will begin discharging. This discharge will show up in the battery data graph as a blue spike, showing the player exactly when the grid was not fully satisfied. Keep in mind that this trick will ''not'' work if the planet is powered by Energy Exchangers, as these will be constantly discharging and thus the single Accumulator's power spike will likely not be significant enough to be visible.<br />
 {{Item Navbox}}
 [[Category:Item]]
 [[Category:Power Storage]]
 [[Category:Building]]