Oil Refinery

Refining Facility

The extracted crude oil is further refined to obtain refined oil and hydrogen.

1

6 s

10

6

1

2

4 s

2

1

3

4 s

1

2

3

4 s

2

1

Summary

The extracted crude oil is further refined to obtain refined oil and hydrogen.

Recipe	Building	Replicator?	Technology
1 6 s 10 10 6 6		✔

Stage 1	Stage 2	Stage 3	Stage 4	Stage 5
30	30	10		1
10	10
6	6	6
3	3	6
24	24	24	6
12	12	24
36	24	12

X-ray Cracking (Tech) with refineries directly converts 1 Refined Oil into 1 Energetic Graphite and 1 Hydrogen
- 1 refinery configured to refine Crude Oil into Refined Oil and Hydrogen can fuel 2 refineries using X-ray Cracking (Tech) if the Hydrogen produced is cycled back into the X-ray Cracking process.
- A typical X-ray Cracking setup (3 refineries total) produces a total of 15 Energetic Graphite/minute and 30 Hydrogen/minute.

The output of X-ray Cracking directly aligns with the requirements to create Energy Matrix, and is the primary purpose.
- It is not recommended to use X-ray Cracking outside of this purpose as there are simpler, more power efficient ways to obtain Hydrogen and Energetic Graphite directly.

The products of X-Ray Cracking (3 total refineries) have a total energy of (6.3 MJ/Energetic Graphite * 30 Energetic Graphite/min) + (8 MJ/Hydrogen * 45 Hydrogen/min) = 549 MJ/min = 9.15 MJ/s = 9.15 MW
- Given that this setup consumes only 2.88 MJ, plus (18kW * 11 Sorter Mk.I) = 0.198 MW (one sorter per input/output), and an additional 0.84 MW for the oil extractor (which can be spread across multiple triplicates of refineries), this is an energy positive process.
- It is not recommended to use X-ray Cracking to generate sustainable power due to the limited nature of Crude Oil when Thermal Power Stations are relevant.
Reforming Refine (Tech) with refineries coverts 2 Refined Oil, 1 Hydrogen, and 1 Coal into 3 Refined Oil.
- For the cost of a coal this, combined with Plasma Refining, allows the production of Refined Oil without byproduct production of Hydrogen.
- Combined with X-ray cracking, and a one-time jump-start input of refined oil and hydrogen, this allow conversion of Coal to Energetic Graphite at a 1:1 ratio; rather than Smelting Purification's 2:1 ratio.