Water Pump

From the Dyson Sphere Program Wiki
Revision as of 15:46, 1 March 2024 by Cthulhu (talk | contribs) (Fixed dead end link, added additional information in Tips and Tricks.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Water Pump
Water Pumping Facility
Facility used to directly extract liquid resources can collect sulfuric acid from the sulfuric acid ocean.
Icon Water Pump.png
Gathering TargetLiquid Source
Gathering Speed50 * Mining speed/min
Work Consumption300 kW
Idle Consumption12.0 kW
Made InAssembler
Hand-MakeReplicator
Stack Size30

Icon Water Pump.png
1
4 s
Icon Iron Ingot.png
8
Icon Stone Brick.png
4
Icon Electric Motor.png
4
Icon Circuit Board.png
2

Summary

The Water Pump is used to extract Water from a Water Ocean and directly deposit it to a Belt.

Despite its name, the Water Pump can also harvest Sulfuric Acid from Sulfuric Acid Oceans.

Production Chain

Recipe Building Replicator? Technology
Icon Water Pump.png
1
4 s
Icon Iron Ingot.png
8
Icon Stone Brick.png
4
Icon Electric Motor.png
4
Icon Circuit Board.png
2
Icon Assembling Machine Mk.I.pngIcon Assembling Machine Mk.II.pngIcon Assembling Machine Mk.III.pngIcon Re-composing Assembler.png
Tech Fluid Storage Encapsulation.png

Raw Material Cost

The raw materials required to build 1 Water Pump are:

Icon Iron Ore.png
26
Icon Copper Ore.png
3
Icon Stone.png
4

Additional Notes

Upon exceeding the maximum transport capacity of the Conveyor Belt Mk.III the output of the Water Pump will be piled. This happens after reaching Veins Utilization Level 351 (3610% mining speed), when mining speed becomes 1805. Since then the output cargo will be output in two-stacks when needed. Increasing the Water Pump output by every additional 1800 items/min will raise the stacking limit by 1 (up to 4), and a Mk.III belt with 4-stacked items will be fully saturated when reaching Veins Utilization Level 1430 (14400% mining speed).

The stacking limit will apply regardless of the connected belt tier.

Player Tips & Tricks

  • After placing a Pump you can fill the liquid with foundations, it will still extract liquid. This allows to place far more pumps on large bodies of liquid.
  • Pumps can be rotated similar to Miners to better cover the edges.
  • Here's a formula for determining how many water pumps you need to fill a belt:
P = (6 * Bs) / (5 + (0.5 * Vu))
P = Pumps
Bs = Belt Speed (in items/second)
Vu = # of Veins Utilizations Upgrades completed
🍪 We use cookies to keep session information to provide you a better experience.